Explanation of the Function and Types of Cycloid Needle Wheel Reducer

Adddate：2014/4/1　Views：3644

The function of the reducer:
1) Reduce speed while increasing output torque. The torque output ratio should be calculated by multiplying the motor output by the reduction ratio, but it should be noted not to exceed the rated torque of the gearbox. 
2) The speed also reduces the inertia of the load, and the reduction in inertia is the square of the reduction ratio. You can see that most motors have an inertia value. 
Types of reducers:
General cycloidal pinwheel reducers include helical gear reducers (including parallel axis helical gear reducers, worm gear reducers, bevel gear reducers, etc.), planetary gear reducers, cycloidal pinwheel reducers, worm gear reducers, planetary friction type mechanical continuously variable transmissions, and so on. 
Gearboxes are generally used for low-speed and high torque transmission equipment, such as electric motors The internal combustion engine or other high-speed power is reduced by meshing the large gear on the output shaft with the gear with fewer teeth on the input shaft of the reducer. Ordinary reducers also have several pairs of gears with the same principle to achieve the ideal reduction effect. The ratio of the number of teeth between the large and small gears is the transmission ratio. Gearboxes are generally used for low-speed and high torque transmission equipment, such as electric motors The internal combustion engine or other high-speed power is reduced by meshing the large gear on the output shaft with the gear with fewer teeth on the input shaft of the reducer. Ordinary reducers also have several pairs of gears with the same principle to achieve the ideal reduction effect. The ratio of the number of teeth between the large and small gears is the transmission ratio. A reducer is a power transmission mechanism that uses a gear speed converter to reduce the number of rotations of a motor to the desired number and obtain a larger torque.